Benutzer:Felicia/Modular-Synth
| Projekt K.R.A.C.H. Release status: beta [box doku] | |
|---|---|
| |
| Beschreibung | Modularsynthesizer |
| Autor(en) | Felicitus, mxf |
| Letzte Version | 0.9a13 |
Das Projekt K.R.A.C.H. ist ein Modularsynthesizer, der von Benutzer:Felicitus und Benutzer:mxf gebaut wird. Im folgenden werden die meisten Infos in Englisch geschrieben, um anderne Benutzern Infos zu dem Projekt und Problemlösungen zu der Konstruktion der Module zu bieten.
Media
- Demo of the VCO+Steiner VCF modules: http://www.youtube.com/watch?v=6XKToZ3mhps
Finished Modules
- 1x VCO
- 1x YuSynth Steiner VCF
- 1x YuSynth ADSR
- 1x VCA
- 1x PSU
Build Log
Build log started on 2012-05-11, events prior that are not logged.
| Date | Log Entry |
|---|---|
| 2012-06-05 | Finished the PolyDAC module |
| 2012-05-25 | Drilled the VCA panel and (almost) finished that module - the PCB needs to be mounted on the front panel. Created the PolyDAC front panel and glued it to the base. |
| 2012-05-23 | PolyDAC PCB arrived, populated the board. |
| 2012-05-21 | Drilled ADSR front panel, mounted things. Module working! |
| 2012-05-17 | Printed the front panel designs, cut the front panels into size, glued things together. |
| 2012-05-10 | Drilled the LFO PCB, yet unpopulated. Finished building the other PCBs (ARP VCF, VCA, ADSR etc). They are missing front panels so far. |
Planned Modules or under construction
The following modules are under construction:
- 3x YuSynth ADSR-2
- 2x ADSR-2 PCBs are built, the front panels are under construction
- Other PCB needs drilling
- 1x YuSynth VCO
- PCB is built, needs front panel
- 2x YuSynth VCA
- One VCA is built, PCB needs to be mounted to the front panel
- The other VCA PCB is etched, needs drilling
- 2x YuSynth LFO-1
- One LFO PCB is drilled, other one needs drilling
- 1x YuSynth ARP4072
- Built, needs front panel
- Minimoog VCF
- Etched, needs drilling
- EMS Filter
- Etched, needs drilling
Others:
- 1x PolyDAC MIDI to CV Converter
- 1x PSU
- Atari Junk Console
- Atari Punk Console
- 16 Step Sequencer
Format
The Synth-Format used is the one by YuSynth (MOTM). Specs are as follows:
| Module Height | 8.75" (22.225 cm) |
| Module Width (minimum) | 2.125" (5.3975 cm) |
| Module Depth (max) | 4.5" (11.43 cm) |
| Jacks | 1/4" (6,35mm) |
| Power | +/-15V |
| Power Jackets | PSK Series, 3 contacts (+15V, GND, -15V) - YuSynth PCBs need to be adjusted for that. Alternative is PSK Series, 5 contacts (+15V, EMPTY, EMPTY, GND, -15V) to PSK series, 3 contacts. |
I'm using the PSK 5 pin connectors for all YuSynth modules and simply connect only the three required wires. Other side of the cable is a PSK 3 pin connector to connect to the PSU.
Subpages
<splist />