Benutzer:Felicia/Modular-Synth

     

Projekt K.R.A.C.H. Release status: beta [box doku]
Beschreibung	Modularsynthesizer
Autor(en)	Felicitus, mxf
Letzte Version	0.9a13

Das Projekt K.R.A.C.H. ist ein Modularsynthesizer, der von Benutzer:Felicitus und Benutzer:mxf gebaut wird. Im folgenden werden die meisten Infos in Englisch geschrieben, um anderne Benutzern Infos zu dem Projekt und Problemlösungen zu der Konstruktion der Module zu bieten.

Media

• Demo of the VCO+Steiner VCF modules: http://www.youtube.com/watch?v=6XKToZ3mhps

Current Modules

• 1x VCO
• 1x YuSynth Steiner VCF
• 1x PSU

Build Log

Build log started on 2012-05-11, events prior that are not logged.

Date	Log Entry
2012-05-10	Drilled the LFO PCB, yet unpopulated. Finished building the other PCBs (ARP VCF, VCA, ADSR etc). They are missing front panels so far.

Planned Modules or under construction

The following modules are under construction:

• 2x YuSynth ADSR-2
• 2x YuSynth VCO
• 2x YuSynth VCA
• 1x YuSynth Steiner VCF
• 2x YuSynth LFO-1
• 1x YuSynth ARP4072

Others:

• 1x PolyDAC MIDI to CV Converter
• 1x PSU

Format

The Synth-Format used is the one by YuSynth (MOTM). Specs are as follows:

Module Height	8.75" (22.225 cm)
Module Width (minimum)	2.125" (5.3975 cm)
Module Depth (max)	4.5" (11.43 cm)
Jacks	1/4" (6,35mm)
Power	+/-15V
Power Jackets	PSK Series, 3 contacts (+15V, GND, -15V) - YuSynth PCBs need to be adjusted for that. Alternative is PSK Series, 5 contacts (+15V, EMPTY, EMPTY, GND, -15V) to PSK series, 3 contacts.

I'm using the PSK 5 pin connectors for all YuSynth modules and simply connect only the three required wires. Other side of the cable is a PSK 3 pin connector to connect to the PSU.

Subpages

<splist />

Further Reading

Synth-related link list