HANAS/Fantec: Unterschied zwischen den Versionen
(added cat of Configs) |
Keine Bearbeitungszusammenfassung |
||
(Eine dazwischenliegende Version von einem anderen Benutzer wird nicht angezeigt) | |||
Zeile 1: | Zeile 1: | ||
{{Archiv|title=RZL-Historie|msg=Diese Seite wurde archiviert, um RaumZeitLabor Historie zu erhalten}} | |||
__TOC__ | |||
* RS232 Port unter der HDD | * RS232 Port unter der HDD | ||
** Belegung: >| 3,3V | RX | TX | GND | | ** Belegung: >| 3,3V | RX | TX | GND | | ||
Zeile 200: | Zeile 205: | ||
# cron.c-main: CRON 304 startup fork ok | # cron.c-main: CRON 304 startup fork ok | ||
</pre> | |||
* Layout of the Flash: | |||
<pre> | |||
# cat /proc/mtd | |||
dev: size erasesize name | |||
mtd0: 00400000 00010000 "Physically mapped flash" | |||
mtd1: 00020000 00010000 "Boot-loader" | |||
mtd2: 00004000 00002000 "Boot CFG" | |||
mtd3: 00002000 00002000 "POST Result" | |||
mtd4: 00008000 00002000 "Linux CFG" | |||
mtd5: 00002000 00002000 "Reserved" | |||
mtd6: 00180000 00010000 "Linux" | |||
mtd7: 00170000 00010000 "RAM disk #2" | |||
mtd8: 000e0000 00010000 "RAM disk #1 (root)" | |||
# | |||
</pre> | </pre> | ||
Aktuelle Version vom 5. November 2023, 12:08 Uhr
- RS232 Port unter der HDD
- Belegung: >| 3,3V | RX | TX | GND |
- Fantec Boot Log:
PPCBoot 2.0.0-A9 (Mar 27 2007 - 13:25:38) CPU: MPC8241 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB D-Cache Board: Sandpoint 8241 Unity ##Test not implemented yet## DRAM: 64 MB FLASH: Manufacturer code: 0xEC, Device code: 0xA2 : 4 MB In: serial Out: serial Err: serial EPIC: reset is in process ....doneNet: RTL8169S driver v1.5-A4 03-15-2005 RTL8169#0 Press space to abort autoboot in 3 second running post.... ## Booting image at ffc10000 ... Image Name: kernel Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1259711 Bytes = 1.2 MB Load Address: 00000000 Entry Point: 0000000c Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at fff20000 ... Image Name: Mpc8241 ramdisk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 900408 Bytes = 879.3 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 03e71000, end 03f4cd38 ... OK before (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb Linux version 2.4.32 (hearn@MARS-V) (gcc version 3.2.3) #1 Tue Nov 13 14:38:38 CST 2007 Motorola PMC8241 PORTING by Premier Microelectronics Development On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ethaddr=00:08:54:48:FB:D2 sizeof(OpenPIC_Reg)=16 OpenPIC Version 1.2 (1 CPUs and 138 IRQ sources) at fc040000 Decrementer frequency = 133.000000 MHz Warning: real time clock seems stuck! Calibrating delay loop... 176.94 BogoMIPS Memory: 61132k available (1616k kernel code, 896k data, 240k init, 0k highmem) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page cache: 64MB memory, maximum pages = 5120, maximum inactive pages = 300 Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 NTFS driver 2.1.6b [Flags: R/O]. NH230_gpio: NH200 GPIO setting ... Trying to free free IRQ20 NH230_gpio: Get the IRQ SUCCESS !! Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xfc004500 (irq = 137) is a 16550A RAMDISK driver initialized: 16 RAM disks of 193840K size 1024 blocksize loop: loaded (max 8 devices) RTL8169s/8110s: RTL8169S: NAPI enabled eth0: RTL8169s/8110s Gigabit Ethernet driver 2.2-R5 (09/05/2005) at 0xc5000e00, 00:08:54:48:fb:d2, IRQ 17 eth0: Auto-negotiation Enabled. SCSI subsystem driver Revision: 1.00 sata_sil(00:10.0): cache line size not set. Driver may not function ata1: SATA max UDMA/100 cmd 0xC5002C80 ctl 0xC5002C8A bmdma 0xC5002C00 irq 18 ata2: SATA max UDMA/100 cmd 0xC5002CC0 ctl 0xC5002CCA bmdma 0xC5002C08 irq 18 ata1: dev 0 ATA, max UDMA/133, 1465149168 sectors: lba48 ata1: dev 0 configured for UDMA/100 ata2: no device found (phy stat 00000000) scsi0 : sata_sil scsi1 : sata_sil Vendor: ATA Model: ST3750640AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 scsi: fn_scsi_storage_pnp [/etc/rc.d/usb_pnp sda 1 255 serial_unknown] fn_scsi_storage_pnp: error[-2]: failed to call user-mode shell script [/etc/rc.d/usb_pnp]. SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 physmap flash device: 400000 at ffc00000 Amd/Fujitsu Extended Query Table v3.3 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Using physmap partition definition Creating 8 MTD partitions on "Physically mapped flash": 0x00300000-0x00320000 : "Boot-loader" 0x00000000-0x00004000 : "Boot CFG" 0x00004000-0x00006000 : "POST Result" 0x00008000-0x00010000 : "Linux CFG" 0x00006000-0x00008000 : "Reserved" 0x00010000-0x00190000 : "Linux" 0x00190000-0x00300000 : "RAM disk #2" 0x00320000-0x00400000 : "RAM disk #1 (root)" usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:0e.2: NEC Corporation USB 2.0 ehci_hcd 00:0e.2: irq 19, pci mem c5006f00 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:0e.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 5 ports detected host/usb-ohci.c: USB OHCI at membase 0xc5008000, IRQ 19 host/usb-ohci.c: usb-00:0e.0, NEC Corporation USB usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected host/usb-ohci.c: USB OHCI at membase 0xc500a000, IRQ 19 host/usb-ohci.c: usb-00:0e.1, NEC Corporation USB (#2) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver usblp printer.c: v0.13: USB Printer Device Class driver usb.c: registered new driver audio audio.c: v1.0.0:USB Audio Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 879k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 240k init init started: BusyBox v1.00 (2007.11.13-06:43+0000) multi-call binary Remounting root EXT3 FS 2.4-0.9.19, 19 August 2002 on ramdisk(1,0), filesystem in reinternal journal ad-write mode. Mounting local filesystems. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. *** Copy the etc.tgz to the etc ***>> ITUNES_FOLDER='mp3' UPNP_ENABLE='0' UPNP_FOLDER='upnp' Load last config ==> *** Init ...... ***>> *** Set up the hostname ***>> Running network..... killall: dhcpcd: no process killed route: SIOC[ADD|DEL]RT: No such process Thu Jul 21 13:16:00 CET 2011 Adding Swap: 538168k swap-space (priority -1) *** Mount swap partition OK ***>> *** Auto check USB storage ***>> killall: smbd: no process killed *** smb.conf success checked!!! ***>> *** Check HD and smb.conf ***>> killall: smbd: no process killed *** smb.conf success checked!!! ***>> Version 3.0.6 cp: /mnt/ntx_chset.h: No such file or directory *** Starting httpd ***>> *** Starting the upnp ***>> Starting main()!! SERVER_PORT = 80(80) Can't start upnp !! *** Starting the pnmd ***>> MAC address = 00:08:54:48:FB:D2 killall: smbd: no process killed *** smb.conf success checked!!! ***>> /dev/sda: setting standby to 180 (15 minutes) BusyBox v1.00 (2007.11.13-06:43+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. # cron.c-main: CRON 304 startup fork ok
- Layout of the Flash:
# cat /proc/mtd dev: size erasesize name mtd0: 00400000 00010000 "Physically mapped flash" mtd1: 00020000 00010000 "Boot-loader" mtd2: 00004000 00002000 "Boot CFG" mtd3: 00002000 00002000 "POST Result" mtd4: 00008000 00002000 "Linux CFG" mtd5: 00002000 00002000 "Reserved" mtd6: 00180000 00010000 "Linux" mtd7: 00170000 00010000 "RAM disk #2" mtd8: 000e0000 00010000 "RAM disk #1 (root)" #
- Cat of various Configs, Directorys, etc.
# cat /proc/cpuinfo processor : 0 cpu : 82xx revision : 16.20 (pvr 8081 1014) bogomips : 176.94 vendor : Motorola machine : MPC8241 processor : PVID: 0x80811014, vendor: Motorola
#cat /proc/version Linux version 2.4.32 (hearn@MARS-V) (gcc version 3.2.3) #1 Tue Nov 13 14:38:38 CST 2007
# free total used free shared buffers Mem: 62252 20000 42252 0 472 Swap: 0 0 0 Total: 62252 20000 42252
# ls -la /etc/init.d/ drwxr-xr-x 2 0 0 1024 Nov 13 2007 . drwxrwxr-x 10 503 506 1024 Jul 21 08:38 .. -rwxr--r-- 1 0 0 134 Nov 13 2007 arp.sh -rwxr--r-- 1 0 0 151 Nov 13 2007 automount.sh -rwxr--r-- 1 0 0 71 Nov 13 2007 date2rtc.sh -rwxr--r-- 1 0 0 650 Nov 13 2007 dhcpc.sh -rwxr--r-- 1 0 0 527 Nov 13 2007 ntp.sh -rwxr--r-- 1 0 0 1530 Nov 13 2007 old_automount.sh -rwxr--r-- 1 0 0 24 Nov 13 2007 rtc2date.sh -rwxr--r-- 1 0 0 350 Nov 13 2007 umount_usb.sh -rwxr--r-- 1 0 0 2118 Nov 13 2007 update_printer.sh -rwxr--r-- 1 0 0 1033 Nov 13 2007 upnp.sh -rwxr--r-- 1 0 0 1672 Nov 13 2007 watchdog.sh -rwxr--r-- 1 0 0 1589 Nov 13 2007 watchdog.sh.bak #
# ls -la /etc/rc.d drwxr-xr-x 2 503 506 1024 Nov 13 2007 . drwxrwxr-x 10 503 506 1024 Jul 21 07:50 .. -rwxr--r-- 1 0 0 134 Nov 13 2007 copy_button_led.sh -rwxr--r-- 1 0 0 1602 Nov 13 2007 groupadd -rwxr--r-- 1 0 0 568 Nov 13 2007 groupdel -rwxr--r-- 1 0 0 1293 Nov 13 2007 groupmod -rwxr--r-- 1 0 0 327 Nov 13 2007 hostname -rwxr--r-- 1 0 0 247 Nov 13 2007 hosts.sh -rwxr--r-- 1 0 0 930 Nov 13 2007 init.sh -rwxr--r-- 1 0 0 394 Nov 13 2007 itunes.sh -rwxr--r-- 1 0 0 1896 Nov 13 2007 mkEXT3disk.sh -rwxr--r-- 1 0 0 224 Nov 13 2007 mkEXT3usb.sh -rwxr--r-- 1 0 0 682 Nov 13 2007 mkFAT32disk.sh -rwxr--r-- 1 0 0 6306 Nov 13 2007 network -rwxr--r-- 1 0 0 623 Nov 13 2007 network_timesync -rwxr--r-- 1 0 0 1855 Nov 13 2007 old_usb_info.sh -rwxr--r-- 1 0 0 1792 Nov 13 2007 old_usb_info_all.sh -rwxr--r-- 1 0 0 76 Nov 13 2007 options -rwxr--r-- 1 0 0 3610 Nov 13 2007 p2p.sh -rwxr--r-- 1 0 0 3610 Nov 13 2007 p2p_bak.sh -rwxr--r-- 1 0 0 465 Nov 13 2007 powerdown.sh -rwxr-xr-x 1 503 506 2227 Nov 13 2007 rc.sysinit -rwxr--r-- 1 0 0 350 Nov 13 2007 remove_usb.sh -rwxr--r-- 1 0 0 42 Nov 13 2007 restart -rwxr--r-- 1 0 0 3365 Nov 13 2007 save_config.sh -rwxr--r-- 1 0 0 127 Nov 13 2007 set_to_default.sh -rwxr--r-- 1 0 0 6 Nov 13 2007 sfdisk.conf -rwxr--r-- 1 0 0 397 Nov 13 2007 upnp_host.sh -rwxr--r-- 1 0 0 299 Nov 13 2007 upnpav.sh -rwxr--r-- 1 0 0 755 Nov 13 2007 usb_backup.sh -rwxr--r-- 1 0 0 3926 Nov 13 2007 usb_info.sh -rwxr--r-- 1 0 0 3830 Nov 13 2007 usb_info_one_port.sh -rwxr--r-- 1 0 0 6823 Nov 13 2007 usb_pnp -rwxr--r-- 1 0 0 639 Nov 13 2007 usb_pnp0 -rwxr--r-- 1 0 0 639 Nov 13 2007 usb_pnp1 -rwxr--r-- 1 0 0 639 Nov 13 2007 usb_pnp2 -rwxr--r-- 1 0 0 639 Nov 13 2007 usb_pnp3 -rwxr--r-- 1 0 0 598 Nov 13 2007 wget_upgrade.sh #